Materials testing

Product (28)
  • Hart 9141 dry block calibrator
    The Hart 9141 dry block calibrator is available to rent.
  • Mecmesin Advanced Force Gauge
    The Mecmesin Advanced Force Gauge (AFG) is a versatile and fully featured digital force gauge that has been specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
  • IDM Instruments B0012 crease bend tester
    The B0012 crease bend tester for cardboard and corrugated cardboard is used to monitor scoring equipment to ensure box performance, by measuring the bending resistance of creased board at the time of folding at the crease. The maximum force required to bend the sample board is shown on the digital display.
  • Particle Test penetrometer
    Particle Test has released a penetrometer that can be used to determine consistency and shear stability for design, quality control and identification purposes.
  • ASM WS31 cable extension sensor series
    ASM’s WS31 cable extension sensor series includes a mounting bracket for easy flexible installation of the sensor and thus position measurement in almost every direction.
  • IDM Instruments B0008 - Bedding Impact Tester
    The B0008 - Bedding Impact Tester has been designed and manufactured to perform various tests and evaluations of innerspring, boxspring and foam mattresses, as well as chairs, cushions and other similar products.
  • Shore Digital Durometer hardness testers
    Shore Digital Durometer Hardness Testers can be used to measure the hardness of rubber and plastics according to ASTM D2240, DIN 53505, ISO 868 and ISO 7619. Shore A scale is applicable for rubber and soft plastics whereas Shore D is for hard rubber and thermoplastics.
  • F0008-Falling Dart Impact Tester
    The F0008-Falling Dart Impact Tester covers the determination of the energy that causes polyethylene film to fail under specified conditions, with the impact of a free-falling dart. This energy is expressed in terms of weight (mass) of the dart falling from a specified height, which would result in 50% failure of specimens tested.
  • Lloyd Instruments FT Plus coefficient of friction tester
    The Lloyd Instruments FT Plus bench-mounted, single lead screw dedicated friction tester measures static and kinetic coefficients of friction to a high accuracy.
  • Micromeritics AccuPyc II 1340 gas displacement pycnometer
    Micromeritics has designed a gas displacement pycnometer to address the needs of operations that need to know the pore volume of drilling cores. The AccuPyc II 1340 has a large sample chamber (a volume of approximately 2000 cm3) that can accommodate a 95 mm diameter core of up to 278 mm in length, improving sampling statistics by eliminating the need to run multiple analyses.
  • Vibratory feeder
    Netter EziPack feeders are suitable for the fast and exact feeding of all types of products.
  • Handheld tachometer
    The compact RheinTech Rotaro Digital handheld tachometer has two measuring methods: the optical and therefore non-contact method measures up to 99,999 rpm and the mechanical method, using an adapter and various probes to measure up to 19,999 rpm.
  • Tensile wedge grips
    IDM Instruments has available heavy-duty, self-tightening wedge grips for tensile applications. With a capacity of 5.3 kN, the grips are suitable for a range of tensile testing requirements, when used together with a motorised test stand.
  • Capping head load tester
    SI Instruments has released TehloTest, a wireless edition of its Head Load Tester which is used in wineries throughout Australia.
  • Automated rubber hardness tester
    The GS-680 is a micro rubber hardness tester that can be used to measure international rubber hardness (IRHD-M method) complying with ISO 48 or the like, regarding to the hardness of vulcanised rubbers and thermoplastics. The model is a fully automated measuring type and applicable software is also included allowing simple operation via a PC.
  • Concrete testing machines
    Tinius Olson concrete testing machines can be used to determine compression, stress, strain, Young’s Modulus and flexural strength. The range of testing machines carrying out tests in accordance with ASTM, AASH, BS and EN standards includes portable, semi-automatic and automatic machines actuated by hydraulic pumps which provide a compressive force range from 50 to 3000 kN.
  • Materials testing
    The Universal Testing Machine is a specialised testing machine that is designed with twin testing capabilities — compression testing in the inner frame and tensile testing on the outer frame of the machine.
  • Twin column test stands
    Mecmesin twin column testing frames provide the opportunity to test physically larger specimens and apply loads up to 25 kN. The increased load allows samples up to 400 mm wide and 950 mm high to be accommodated. Each test frame has been designed to deliver high stiffness — often necessary in high load, low elongation testing applications — and are driven by twin, pre-loaded, synchronised ballscrews.
  • Surface area and pore size analysis
    The Micromeritics TriStar II analysis system is a fully automated, three-station analyser that is easy to use and designed to analyse up to three samples simultaneously for optimum throughput.
  • Digital micrometer
    The IDM Instruments digital micrometer can be used to measure the thickness of paper, plastic, tissue and other sheeted material requiring precise digital thickness measurement.
  • Compression testing
    The Time Group YAW Hydraulic Testing Machines are suitable for compression testing of hard, brittle materials including cement, concrete and other construction materials.
  • Force tester
    The Chatillon TCD225 force-testing system can be set up in seconds to perform a wide variety of tests. It allows users to perform singular or multi-variable testing without relying on a personal computer or complex software.
  • Ultrasonic flaw detector
    The ultrasonic TUD 320 flaw detector from Time Group uses pulse echo, dual and through-transmission to perform its flaw detection functions.
  • Texture analyser
    The TMS-Pro System provides precise, objective and repeatable measurements of the texture of food products.
  • Tension and compression test stand
    The Mecmesin MultiTest-d test stands are available in 1 and 2.5 kN capacities. The stands work in conjunction with a Mecmesin digital force gauge and form an entry-level motorised test system for users who wish to evaluate quality control parameters of their products in tension and compression.
  • Compression testing
    The Time Group YAW Hydraulic Testing Machines are suitable for compression testing of hard, brittle materials including cement, concrete and other construction materials.
  • Colour analysis cabinet
    The IDM Colour Check Cabinet is manufactured to assess colour changes under different light sources: fluorescent artificial daylight, incandescent source, fluorescent and UV black light.
  • Porosity tester
    The Foam Porosity Tester Digital is an instrument for monitoring the porosity of flexible cellular polyurethane, to determine the ease with which air passes through a cellular structure.
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in