FAULHABER 1024…SR series 10 mm motors

Click2Contact

FAULHABER has launched a series of metal brush commutated motors, the 1024…SR series, with a diameter of 10 mm. In combination with a gearhead, its output torque can achieve 300 mNm — said to be twice that of similar products on the market.

Due to a good torque/speed ratio (flat slope), the motor can handle varying loads at reduced speed variations, thus granting smooth control. This performance is achieved with low noise and vibration levels. A wide range of matching speed and motion controllers, encoders and gearheads allows for optimal adaption in high-demand applications like portable devices or optical equipment.

The improvement in power and torque achieved by the series is based on a redesign of nearly all of the motor’s elements, including a new coil, commutation system and magnet. This results in a wider speed range under load, delivering a continuous torque of 1.5 mNm at 7500 rpm and exhibiting an output power above 3 W. The voltage can be chosen between 6 and 12 V.

Suitable for high-demand applications, the motor’s ability to offer high performance with small dimensions and low weight makes it a good choice for portable devices. Its low vibration levels enable its use in high-accuracy applications, such as in optical equipment or high-precision tools. An optional ball bearing version makes it suitable for applications with radial loads. The motor is also available with a second shaft end, in a vacuum and in an extended temperature range version (-30 to +125°C).