The WaterTest Kit is used for the quantitative determination of water content in % of mineral and lubrication oils. The simple addition of two reagents to the contaminated oil causes an increase of pressure in the measuring cell. This pressure increase is read off via the digital display as water content in % or ppm.
The measurement range can be selected from 0.02-1%, 0-10% and 100-3000 ppm. The time per measurement is approximately 2 min without sample preparation.
The product’s plastic housing is lightweight, impact-proof and chemical-resistant. The pressure sensor is easily cleaned and has highly accurate measurement. There is high resolution in the lower measurement range.
Phone: 03 9272 8900
Lambert Instruments TRiCAM intensified low-light imaging CMOS camera with ultra-short gating
The Lambert Instruments TRiCAM is a compact intensified CMOS camera designed for scientific...
SPAD 23 single-photon detector
SPAD 23 from PI Imaging is a single-photon detector array designed to advance research in...
Azure 300 chemiluminescent western blot imager
The Azure 300 from Azure Biosystems is a versatile multichannel imager designed for fluorescence,...
Learn More
I am interested in HYDAC WaterTest Kit.
Complete the form and a supplier representative will be in touch.
