Gasmet CEMS II e FTIR gas emissions analyser

Thursday, 05 May, 2016 | Supplied by: Thomson Environmental Systems

Gasmet Technologies’ continuous emissions monitoring (CEM) system has completed EN 15267-3 testing using FTIR technology for the analysis of low-range HF, low-range NO, CH4 and formaldehyde. This means that it meets the performance specifications in European directives and also the more stringent specifications in the type approval standard EN 15267-3 for a large number of components.

The results for hydrogen fluoride were said to be as good as or better than other FTIR manufacturers, while the data for nitrogen oxide and formaldehyde was particularly significant. No other FTIR is certified down to 150 mg/m3 NO, according to the company, and no other instrument is approved for formaldehyde at all.

Other improvements include a reduction in the product’s baseline noise level significantly, improving sensitivity by a factor of two.

The CEM system has since been denoted ‘CEMS II e’ to highlight the extended range of certified components and the enhanced analytical performance. The same improvements also apply to all Gasmet portable FTIR analysers.

Phone: 02 9526 8199
Related Products

JASCO spectroscopy and chromatography instrumentation

JASCO is a provider of high-quality spectroscopy and chromatography instrumentation for...

Thermo Scientific FAIMS Pro Duo interface

The Thermo Scientific FAIMS Pro Duo interface supports biological mass spectrometry (MS) and...

Thermo Scientific Orbitrap IQ-X Tribrid mass spectrometer

The Thermo Scientific Orbitrap IQ-X Tribrid mass spectrometer has been designed specifically for...

  • All content Copyright © 2021 Westwick-Farrow Pty Ltd