Camfil CamContain CS HEPA filter containment housings
The Camfil CamContain CS is a fully customisable safe-change HEPA filter containment housing designed specifically for pharmaceutical, biotechnological, nuclear or BSL-3/BSL-4 facilities seeking high performance within critical applications.
Each welded (gas-tight), torsion-resistant stainless steel housing conforms to the tightness class required by nuclear power stations — DIN 25496, Table 3. Manual or pneumatically operated particulate and clean gas isolation valves have been designed to meet the highest tightness requirements, conforming to global standards DIN 3230 T3 BO BN (leakage rate 1), ISO 5208, Category 3 and ANSI B 16-104, Class V.
Inbuilt safe-change service systems enable easy and safe filter installation utilising bag-in/bag-out (BIBO) procedures. Safety measures allowing easy and safe filter installation include an intelligent decontamination concept, an innovative filter tensioning mechanism preventing the contamination of the service bag and hatch and a robust frame with pneumatic tension release and a centrally guided filter slide-in mechanism.
Custom HEPA filter test sections are available to measure the overall efficiency or allow for annual NATA-accredited HEPA integrity testing.
For more information: https://www.camfil.com/en-au/products/housings-frames--louvers/safety-housing/camcontain.
Phone: 03 9562 0011
The Thermo Scientific Herasafe 2025 BSC was designed to meet the sample and user protection...
HEMCO's Inline Fume Scrubber can be used for removing highly corrosive and acid fumes from...
HEMCO's island canopy hoods can be located over peninsulas and are designed to collect and...