The MetallicContamination Sensor MCS 1000 is used for recording metallic solid particle contamination in lubrication fluids. Metallic particles (ferromagnetic Fe and non-ferromagnetic nFe) in the >70 μm size range are detected.
The Patch Test Kit (or Portable Contamination Analysis Kit) is a tool for identifying and monitoring the types and levels of particulate contamination in all fluid power systems, including those offshore where water-based fluids are utilised.
The WaterTest Kit is used for the quantitative determination of water content in % of mineral and lubrication oils. The simple addition of two reagents to the contaminated oil causes an increase of pressure in the measuring cell. This pressure increase is read off via the digital display as water content in % or ppm.
Modern diesel filtration systems, like the HYDAC Diesel Precare (HDP), ensure vehicle manufacturers and operators are protected from operation malfunctions, failures and expensive service operations. The product offers good performance data through a two-stage water separation as well as good filtration behaviour through the use of synthetic media.
The Contamination Sensor CS 1000 series is an online fluid sensor for permanent monitoring of particle contamination in fluids. The cleanliness results can either be given according to ISO/SAE or ISO/NAS classifications.
Nordhydraulic is a manufacturer of directional control valves for mobile applications. The company’s hydraulic directional spool valves fulfil the requirements of truck loading cranes, excavators, skip loaders/demountable bodies, wheel loaders, forestry equipment and other specialised machinery.
In order to meet the standards for diesel fuel, the fuel must be filtered and dewatered at every stage of the transport chain. The HYDAC product range includes the filters, fluid conditioning units and sensors necessary to do this.
HYDAC axial piston pumps for open circuit in swash plate design are available in the pressure ranges medium and high. They feature a specific displacement flow of 10 to 560 cm3
The automatic back-flushing filter AutoFilt RF3 series is suitable for use in process technology. It has a flow-optimised design and the advantage of conical, slotted tube filter elements in stainless steel, providing consistent flow characteristics and good filtration and back-flushing characteristics.
HYDAC has developed an element technology which inhibits the phenomenon of electrostatic discharge in filter elements, thus reducing the charges in the oil.
The AquaSensor AS 3000 is the further development of the AS 1000 series for the online detection of water in oils, particularly as a sensor for condition monitoring.
The Hydac FluidAqua Mobil FAM 5 serves to dewater, degas and filter hydraulic and lubricating fluids. It is small and easy to use, making it a convenient option.
The Hydac Transformer Care Unit (TCU) is a servicing and care unit for prolonging the useful life of oil-filled transformers and reactors.
The Hydac programmable electronic pressure switch EDS 4400 with pressure-resistant encapsulation and triple approval according to ATEX, CSA and IECEx facilitates universal, global use of the devices in explosion-risk environments. Every device is triple certified and labelled, obviating the need for multiple devices with separate individual approvals.
The Hydac ALPC 9000 is a fully automatically functioning laboratory particle measurement system for hydraulic and lubrication oils. The short measurement times are claimed to permit the evaluation of up to 500 samples/day. Two models of the ALPC are available for the implementation of different requirements: Model ALPC 9000-1 for manual sample introduction from individual sample bottles; and Model ALPC 9000-2 for automatic sample introduction by means of 6-axis robot arm (batch processing).
The Hydac FluidControl Unit FCU 8000 is used as a portable service unit for the measurement of solid particle contamination in hydraulic and lubrication systems.
The Hydac Flow Switch in the series HFS 2500, suitable for water-based media, is based on the variable area float principle and can be used in any position in the system. The test medium moves a spring-loaded float in the direction of flow, depending on the flow rate.
Hydac has available fluid level sensors with two switch points. By using a fluid level sensor, the fluid level is monitored via an electrical switching signal. The switching signal can be used as a warning message or to regulate the fluid level.
Hydac offers a display unit SensorMonitoring Unit SMU 1200 for its fluid sensors, which provides a display and a data logging function.
The programmable electronic pressure switch EDS 4400 with pressure-resistant encapsulation and triple approval according to ATEX, CSA and IECEx facilitates universal, global use of the devices in explosion-risk environments. Every device is triple certified and labelled, obviating the need for multiple devices with separate individual approvals.
The Hydac HMG 510 portable data recorder is a handheld unit for measurement and data capturing tasks involving hydraulic and pneumatic systems. Compact and claimed to be simple to use, the recorder is suitable for use in maintenance, commissioning and service.
The Hydac CTU 1000 series contamination test unit is used for the determination of technical cleanliness of slightly contaminated components.
The Hydac FluidMonitoring System FMS is a ready-for-connection product for continuously measuring and monitoring particulate contamination, water saturation and temperature in hydraulic and lubrication fluids.
The Hydac HY-TTC 60 universal mobile controller, which can be used as a stand-alone solution or as part of a networked system, fulfils all technical requirements for advanced automotive electronics in the off-highway domain.
The FluidMonitoring Module FMM series combines Hydac’s ContaminationSensor CS 1000 and AquaSensor AS 1000 condition monitoring products in one system. It provides the user with a robust and stationary system for online measurement of solid particle contamination and water content (eg, for detecting leakages) in hydraulic and lubrication fluids.
The Hydac FluidControl Unit FCU 2000 series can be used as a portable service unit for the measurement of solid particle contamination in hydraulic and lubrication systems.
The FluidAqua Mobil - FAM 25/45/60/75/95 series filter system operates according to the principle of vacuum dewatering to separate free and dissolved water as well as free and dissolved gases from hydraulic and lubrication fluids. Through the use of Hydac offline filtration technology, with its high contamination retention and separation capacity, the unit is said to be very economical.
To meet the varied and complex demands of mobile hydraulics, Hydac Electronic offers a full and comprehensive product range which includes measurement technology for all variables relevant to mobile hydraulics, from components to systems.
The Hydac HFS Series 2100 electromechanical flow switch for oils and viscous media is based on a variable area float measurement principle.
The Hydac FluidControl Unit FCU 1000 series is a portable fluid service unit for short-term measurement of solid particle contamination in hydraulic systems. The integral AquaSensor AS 1000 also measures humidity and temperature.
The Hydac HMG 3000 and HMG 510 data recorders are mobile data loggers that, through the use of automatic adjustment procedures, a simple operator menu and numerous functions, can be used to take measurements and identify problems.
The dewatering and filtration unit FAM-10 is an addition to the existing FAM-15/30/50/70 line designed for system volumes of up to 2000 L. It is designed for the conditioning of lubrication and hydraulic fluids.
The FluidMonitoring Module FMM series provides the user with a robust and stationary system for online measurement of solid particle contamination and water content (eg, for detecting leakages) in hydraulic and lubrication fluids.
The portable contamination analysis kit is for identifying and monitoring the types and levels of particulate contamination in all fluid power systems including those offshore where water-based fluids are used.
The bottle sampling unit BSU is used in connection with the fluid control unit FCU 8000 for counting oil sample bottles in the laboratory.