Benchtop centrifuges

Friday, 05 May, 2006 | Supplied by: John Morris Scientific Pty Ltd



The Sigma 3-18 and 3-18K high-speed benchtop centrifuges have maximum speeds of 16,000 and 18,000 rpm.

The air-cooled 3-18 has a maximum capacity of 4 x 250 mL and is suitable for use in medical and research laboratories.

The refrigerated 3-18K can be used for tasks which require centrifugal forces up to 30,000 g. The 3-18K enables rotor and chamber pre-cooling to -20°C and allows temperature control up to +40°C. Even at the highest speeds and during long runs, +4°C can be maintained.

Both models have 10 linear and 10 quadratic preprogrammed acceleration and deceleration curves as well as 50 storage places for additional programming needs. Important programs or functions can be PIN code protected.

Rotors include the 40 x 15 mL and 16 x 50 mL fixed angle rotors for cellculture tubes. A 48 x 1.5/2.2 mL fixed angle rotor with polysulfone lid spins the microtubes. The 24 x 1.5/2.2 mL swing out rotor with windshield achieves 14,000 rpm and 16,215 x g.

Online: www.johnmorris.com.au
Phone: 02 9496 4200
Related Products

Monnit ALTA Industrial Wireless Quad Temperature Sensor

The ALTA Industrial Wireless Quad Temperature Sensor, from Monnit, features four independent...

Alfa Laval Optilobe rotary lobe pumps

Alfa Laval OptiLobe rotary lobe pumps are versatile alternatives for general applications...

Eppendorf Conical Tubes 25 mL

When sample volumes higher than 15 mL but much lower than 50 mL must be prepared, centrifuged,...


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd