Generic pipette tips on a multichannel pipette can sometimes be misaligned. This is due to the widespread generic tip cone and tip fitting design as well as in the memory effect of the tip material, which gradually moves back to its original, non-stretched shape. Pipette tips that aren’t level on a multichannel pipette can cause issues such as different immersion depths or faulty touch offs of individual tips, leading to negatively impacted pipetting results.
INTEGRA GripTips feature a positive stop, achieved by a shoulder moulded into all GripTips plus a corresponding tip fitting found on all INTEGRA EVOLVE, VIAFLO II, VOYAGER and VIAFLO 96/384 pipettes. This design ensures that pipette tips cannot be loaded beyond the positive stop and all tips will be at exactly the same height, thus improving the reproducibility of pipetting results.
Featuring a low attachment force and a low ejection force, the tips effortlessly snap onto the tip fittings and are easily ejected. No ‘hammering on’ technique is required and the tips will not loosen, leak or fall off.
Phone: 1300 246 866
HEMCO Vented Safety Enclosure (VSE)
HEMCO's Vented Safety Enclosure (VSE) is offered in 61, 91 and 122 cm widths to accommodate...
TOPTICA DL pro BFY tuneable diode laser
TOPTICA's DL pro BFY tuneable diode laser is especially suitable for applications where...
TOPTICA DFB pro 633 distributed-feedback laser
TOPTICA introduces the DFB pro 633, the latest in the company's range of mode-hop-free...