Plug-and-play titration sensors

Monday, 06 April, 2009 | Supplied by: Mettler-Toledo Ltd

Mettler Toledo has released a range of plug-and-play titration sensors, designed for precise measurement of mineral oils and derived products.

The plug-and-play sensor chip immediately recognises connection with Excellence titrators, providing smooth transfer of relevant data. These monitoring functions check that the sensor is in optimal condition for non-aqueous titrations.

The DGi116-Solvent’s large round glass bulb provides sensitive pH response. Its sliding glass sleeve promotes signal equilibration and is easy to clean. The gold shield for the inner glass half-cell provides electrical and static shielding for noise reduction.

The DMi148-SC is suitable for determining chloride and, after simple sulfidisation of the silver ring, for the titration of mercaptans in petrochemical products. The pH glass reference minimises diaphragm clogging and electrolyte refilling. Acid-based titration applications are possible using the silver ring as reference.

The Rondo sample charger automates the workflow, including the dissolution of the oil sample, titration, and cleaning condition of the sensor. Each sample is analysed in the same manner, increasing result integrity. Daily titration analyses can be started with one click and run unattended.

Phone: 03 9644 5700
Related Products

Tintometer Lovibond SD 335 Multi water tester

The Lovibond SD 335 Multi is a water testing instrument that can measure several parameters...

Socorex Stepper 416 repeater pipette

Socorex's crystal blue repeater pipette Stepper 416 is suitable for serial reagent...

Ugo Basile Librae Incapacitance Tester

The Librae Incapacitance Tester by Ugo Basile has been designed to add speed and accuracy to...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd