Lab equipment > Liquid handling

Tecan clear Liquid Handling (LiHa) disposable tips

04 August, 2017

Tecan has introduced a selection of clear Liquid Handling (LiHa) disposable tips. The tips are intended for use with Air LiHa, Air FCA and Cavro ADP pipetting options, providing verified performance for applications that do not require capacitive liquid level detection (cLLD).


Dragon Lab DL-50-Pro dispenser and diluter system

26 July, 2017

The D-Lab DL-D50 Pro dispenser brings safety and precision to the laboratory. Syringe sizes on offer cover a range from 25 µL through to 25 mL to meet all diluting and dispensing applications, and syringes can easily be interchanged as methods alter.


World Precision Instruments (WPI) SMARTouch syringe controller

18 April, 2017

World Precision Instruments (WPI) has announced the SMARTouch controller, for use with up to two independently controlled UltraMicroPumps (UMP3).


How to choose the right pipette tips for your experiment

05 April, 2017

The precision and accuracy of even the best calibrated pipette can be wiped out if you choose the wrong kind of tips.


Mettler-Toledo Rainin SmartStand intelligent pipette stand

04 April, 2017

Mettler-Toledo's Rainin SmartStand is an intelligent, customisable and highly scalable pipette asset management system that is easily adapted to any laboratory's standard operating procedures.


Biotix xTIP pipette tip for Rainin LTS pipettes

27 March, 2017

The Biotix xTIP has been manufactured for maximum compatibility with Rainin LTS pipettes. The FlexFit feature allows for a secure seal of the tip onto the pipette without needing to force the fit, improving ergonomics and reducing strain.


Thermo Scientific My Pipette Creator application

16 March, 2017

Developed for use in conjunction with the Bluetooth-enabled Thermo Scientific E1-ClipTip electronic pipettes, My Pipette Creator is a cloud-based application designed to enable efficient, centralised programming of connected pipettes.


INTEGRA Low Retention GripTips pipette tips

02 February, 2017

INTEGRA has introduced Low Retention pipette tips based on its GripTips multilobe design. In creating the product range, the company has used a polypropylene blend to produce pipette tips with increased hydrophobic properties.


METTLER TOLEDO Rainin TerraRack pipette tip rack

30 January, 2017

METTLER TOLEDO's Rainin TerraRack is said to be sturdy as a conventional pipette tip rack, yet made with less than half the plastic and completely recyclable.


Hamilton Robotics Microlab NIMBUS automated liquid handling system

27 January, 2017

The Microlab NIMBUS is a compact, multichannel automated liquid handling system offering speed, flexibility, ease of use and good pipetting performance.


Clutching at straws: the science of spill prevention

20 January, 2017

It doesn't take a genius to know that if you knock a glass of water on its side, the liquid will spill out. However, if you happened to be drinking your water through a thin straw, some of the liquid will be retained within this straw.


Tecan Liquid Handling Arm disposable pipette tip

11 January, 2017

Tecan is simplifying handling of biological fluids with the introduction of a wide bore version of its 1000 μL Liquid Handling Arm (LiHa) disposable tip.


Fluicell BioPen open-channel microfluidic device

18 November, 2016

The Fluicell BioPen is a powerful open-channel microfluidic device for maintaining localised superfusion in single-cell experiments, enabling control of the chemical environment around single intact cells in tissue or cell cultures.


Tecan Cavro Omni Flex liquid handling system

10 November, 2016

Tecan's Cavro Omni Flex liquid handling system extends the flexibility and convenience of the company's Cavro Omni Robot by offering more hardware options to complement its precision pipetting.


How to optimise silicone tubing in single-use systems

28 October, 2016 by Csilla Kollar*, Jennifer Gemo^ and Lise Tan-Sien-Hee°

Pharmaceutical and biopharmaceutical companies and contract manufacturers are increasingly adopting single-use systems to replace expensive stainless steel vessels and piping for high-purity fluid transfer in processing operations such as sampling and batch and vial filling.


  • All content Copyright © 2021 Westwick-Farrow Pty Ltd