Fast and accurate trace contaminant detection
11 July, 2012Drugs, toxins and pesticides can be detected at nanogram/litre levels in just 40 minutes with a new class of biosensors developed at the University of New South Wales.
Sensorex S150C and S151C-ORP Polycarbonate Body 12 mm pH/ORP Electrodes
28 June, 2012Laboratory and sampling technicians in search of an alternative to epoxy body electrodes will find that the S150C and S151C-ORP Polycarbonate Body 12 mm pH/ORP Electrodes, from Sensorex, offer a rugged pH and ORP measurement solution.
Fluke 28 II Ex DMM digital multimeter for hazardous zones
28 May, 2012Fluke Corporation has introduced the Fluke 28 II Ex DMM, a digital multimeter for measurements both inside and outside of hazardous zones. The device meets most intrinsic safety (IS) standards worldwide for safe use inside potentially explosive environments, making it suitable for use in petroleum, chemical and pharmaceutical facilities.
Vaisala viewLinc 4.0 version monitoring, alarming and reporting software
18 April, 2012Vaisala has released viewLinc 4.0, the latest version of its monitoring, alarming and reporting software for the Vaisala Continuous Monitoring System.
Cannon Instrument’s miniAV-LT low-temperature automatic viscometer
03 April, 2012Cannon Instrument’s miniAV-LT has been developed for low-temperature (subzero) kinematic viscosity measurement and is said to provide affordable sub-zero D445 automation.
PAC ISL MPP 5G mini cloud pour point analyser
03 April, 2012PAC’s ISL MPP 5G mini cloud pour point analyser complies with the procedures of the ASTM D7689-11 Standard Test Method for Cloud Point of Petroleum Products (Mini Method). Precise measurement of the cloud point is critical for petroleum-blending operations. The new ASTM D7689-11 test method determines the cloud point in a shorter time period than ASTM test method D2500.
Sulfur, nitrogen, halides detection
03 April, 2012The Antek MultiTek by PAC is said to be the only all-in-one instrument that combines testing for sulfur, nitrogen and halides.
ABB MB-Rx in-situ Reaction Monitor
19 March, 2012ABB has introduced the MB-Rx in-situ Reaction Monitor for research laboratories and pilot plants in the chemical, petrochemical, pharmaceutical and biopharmaceutical industries.
Decagon Devices AquaLab Vapor Sorption Analyzer (VSA)
14 March, 2012The AquaLab Vapor Sorption Analyzer (VSA), by Decagon Devices, allows scientists to better understand moisture in products and pinpoint quality control issues.
Hydac ALPC 9000 laboratory particle measurement system for hydraulic and lubrication oils
09 March, 2012The Hydac ALPC 9000 is a fully automatically functioning laboratory particle measurement system for hydraulic and lubrication oils. The short measurement times are claimed to permit the evaluation of up to 500 samples/day. Two models of the ALPC are available for the implementation of different requirements: Model ALPC 9000-1 for manual sample introduction from individual sample bottles; and Model ALPC 9000-2 for automatic sample introduction by means of 6-axis robot arm (batch processing).
Hydac FluidControl Unit FCU 8000 portable service unit
07 March, 2012The Hydac FluidControl Unit FCU 8000 is used as a portable service unit for the measurement of solid particle contamination in hydraulic and lubrication systems.
Hydac fluid level sensors with two switch points
05 March, 2012Hydac has available fluid level sensors with two switch points. By using a fluid level sensor, the fluid level is monitored via an electrical switching signal. The switching signal can be used as a warning message or to regulate the fluid level.
Hydac SensorMonitoring Unit SMU 1200
03 March, 2012Hydac offers a display unit SensorMonitoring Unit SMU 1200 for its fluid sensors, which provides a display and a data logging function.
Hydac HMG 510 portable data recorder
02 March, 2012The Hydac HMG 510 portable data recorder is a handheld unit for measurement and data capturing tasks involving hydraulic and pneumatic systems. Compact and claimed to be simple to use, the recorder is suitable for use in maintenance, commissioning and service.
Hydac CTU 1000 series contamination test unit
01 March, 2012The Hydac CTU 1000 series contamination test unit is used for the determination of technical cleanliness of slightly contaminated components.
