Lab equipment

Reagent reservoir

08 April, 2009 | Supplied by: Lomb Scientific (Aust) Pty Ltd

The V-shaped wells of the Scienceware 12 Channel Reagent Reservoir allow complete sample withdrawal and minimise the waste of reagents. Each channel holds up to 5 mL and is numbered to facilitate serial dilution.

Stirring bar multi-pack

08 April, 2009 | Supplied by: VWR International Pty Ltd

The Spinpak Assortment with Spinbar Restrainer offers octagonal magnetic stirring bars in 12.5, 25.5, 38 and 51 mm lengths in either a 3.2 or 8 mm diameter.

Adhesion slides

08 April, 2009 | Supplied by: Sapphire Bioscience

ImmunoSelect Adhesion Slides by Squarix Biotechnology feature a surface that immobilises cells and tissue sections and maintains a high retention of cell and tissue morphology. This helps to reduce the amount of cellular material and reagents required.

Miniature motor

08 April, 2009 | Supplied by: ERNTEC Pty Ltd

The ADM 0620 is a miniature two-phase stepper motor with a 6 mm outer diameter, is 9.3 mm long, weighs 1.4 g and provides a high power-to-volume ratio.

Gas sample cylinder

08 April, 2009 | Supplied by: Duff & Macintosh

Sentry’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.

Current shunt kit

08 April, 2009 | Supplied by: Fluke Australia Pty Ltd

The A40B precision current shunt set features a range of precision devices designed to simplify the task of making precision current measurements in the laboratory. The set comprises 14 low-inductance coaxial current shunts, adapters and connectors and a rugged transit/storage case.

Automated pipetting platform

08 April, 2009 | Supplied by: Bio-Strategy Pty Limited

The MicroLab Nimbus automated pipetting platform from Hamilton Company offers a high-density deck layout in a compact footprint. The system makes quick work of plate replication, low-volume reagent addition and serial dilution jobs and can handle demanding tasks such as MALDI spotting, PCR sample preparation, DNA/RNA extraction, ELISA and SPE applications.

Sterile valve connections

08 April, 2009 | Supplied by: FlowTherm Australia Pty Ltd

Colder Products Company has released the Steam-Thru II Connections, which provides a sterile connection between disposable systems and existing stainless steel processing equipment.

Colour analyser

08 April, 2009 | Supplied by: IDM Instruments

The ColorQA is a colour comparison device that digitally measures the colour of a target and then allows the user to sample any number of comparison colours to determine a match.

Ohm meter

08 April, 2009 | Supplied by: Westek Electronics Pty Ltd

The KoCoS Promet 100 Precision Ohm meter is suited to tasks including earth bond and weld testing, as well as circuit breaker main contact testing. The device interfaces with the KoCoS range of ACTAS (Advanced Circuit Breaker Test and Analysis Systems) instrumentation.

Force tester

08 April, 2009 | Supplied by: Royce Water Technologies Pty Ltd

The Chatillon TCD225 force-testing system can be set up in seconds to perform a wide variety of tests. It allows users to perform singular or multi-variable testing without relying on a personal computer or complex software.

pH tester

07 April, 2009 | Supplied by: Thermo Fisher Scientific

Powered by microprocessor technology, the EcoTestr pH 1 and pH 2 range of pocket testers is designed for hassle-free pH measurements.

Aerosol barrier tips

07 April, 2009 | Supplied by: Interpath Services Pty Ltd

Aerosol Barrier Tips come in a rack with a hinged lid for easy access and can be used with multi-channel pipettes.

Magnetic stirring bar

07 April, 2009 | Supplied by: Lomb Scientific (Aust) Pty Ltd

The Spinbar Capsule Magnetic Stirring Bar consists of a magnetic stirring bar that spins freely inside a small flat capsule and prevents the stirring bar from contacting the gel.

Add safety to pipetting

07 April, 2009 | Supplied by: Alere Australia

Safe-Cone filters prevent contamination of the pipettor and the sample.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd