Lab equipment

Gas sample cylinder

08 April, 2009 | Supplied by: Duff & Macintosh

Sentry’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.


Microcentrifuge

08 April, 2009 | Supplied by: Eppendorf South Pacific Pty Ltd

The 30-place microcentrifuge 5430 line provides a range of options, including eight different rotors, tubes from 0.2 to 50 mL, microtest plates, deepwell plates and slides.


Sub-visible particle analyser

08 April, 2009 | Supplied by: Crea Laboratory Technologies Pty Ltd

The Pamas SVSS is a laboratory particle counter for the measurement of particulates in liquids. The counter can be used for many fluid applications where particle quantifying and particle size from 1 µm upwards is important.


Buccal swabs

08 April, 2009 | Supplied by: VWR International Pty Ltd

The nylon flocked buccal swabs from MicroRheologics are suitable for applications where the sample size is particularly small or where increased sensitivity is required.


Flip-top sample tubes

08 April, 2009 | Supplied by: Bacto Laboratories Pty Ltd

The BD Falcon 50 ml polypropylene conical tube with flip-top cap is suitable for any research applications requiring one-handed operations to open and close the cap.


Automated pipetting platform

08 April, 2009 | Supplied by: Bio-Strategy Pty Limited

The MicroLab Nimbus automated pipetting platform from Hamilton Company offers a high-density deck layout in a compact footprint. The system makes quick work of plate replication, low-volume reagent addition and serial dilution jobs and can handle demanding tasks such as MALDI spotting, PCR sample preparation, DNA/RNA extraction, ELISA and SPE applications.


Cell culture media bottle

08 April, 2009 | Supplied by: Life Technologies

The Gibco cell culture media bottle has an angled neck for easier pipetting and pouring; a compact form for improved handling and storage; and a wider mouth to reduce the chance of contact with the pipette.


Electrode management system

08 April, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd

The Memobase electrode management system provides users insight into the reliability, performance, estimated lifetime and early-warning-failure of pH electrodes.


Temperature and humidity monitor

08 April, 2009 | Supplied by: Testo Pty Ltd

The Saveris measurement system measures temperature and humidity values in the environment and in processes. The easy-to-use system features radio probes that save their measurement data and send it to the central base at regular intervals.


Flow analysers

08 April, 2009 | Supplied by: ALPE Pty Ltd

The Futura flow analysers reach very low detection limits, while still extending the reporting ranges of results and speeding up the operation by reducing the number of dilutions.


Inline viscometers

08 April, 2009 | Supplied by: Rheology Solutions Pty Ltd

The Marimex range of ViscoScopes provides maintenance-free viscosity measurement for inline applications.


Cogless AC servomotor

08 April, 2009 | Supplied by: M Rutty & Co Pty Ltd

The absence of teeth in the MLL Series Non-Cogging AC servomotor results in no reluctance variation in the 360° motor rotation.


Environmentally friendly pipette

08 April, 2009 | Supplied by: DKSH Australia Pty Ltd

The Capp Ecopipette is a light, ergonomically designed pipette made from eco-friendly materials selected and constructed to provide a long life cycle.


LabServ Microcentrifuge

08 April, 2009 | Supplied by: Thermo Fisher Scientific

The LabServ Microcentrifuge (LBS7510) spins up to 2200 x g and holds 6 x 2 mL/1.5 mL tubes. It comes equipped with adapters for 0.5 mL tubes as well as an interchangeable rotor for 2 x 8-strip PCR tubes (0.2 mL).


Sterile valve connections

08 April, 2009 | Supplied by: FlowTherm Australia Pty Ltd

Colder Products Company has released the Steam-Thru II Connections, which provides a sterile connection between disposable systems and existing stainless steel processing equipment.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd