Lab equipment > Glassware & plasticware

Eppendorf Conical Tubes 25 mL

31 July, 2019

When sample volumes higher than 15 mL but much lower than 50 mL must be prepared, centrifuged, mixed or stored, researchers often have no choice but to use traditional conical screw cap tubes with a volume of either 15 or 50 mL. This dilemma can now be resolved with the Eppendorf Conical Tubes 25 mL.

DURAN reagent bottles

29 May, 2019

DURAN reagent bottles are designed and manufactured in Germany. Made of borosilicate glass, the bottles offer high chemical resistance with low thermal expansion, making them suitable for laboratory applications.

Huber Kältemaschinenbau KISS cooling and heating circulators

20 March, 2017

The KISS model series cooling and heating circulators are suitable for routine laboratory applications such as sample temperature control, analyses and material testing, as well as the external temperature control of measuring devices and test set-ups.

LyondellBasell Purell RP320M polypropylene resin

08 February, 2017

LyondellBasell has introduced Purell RP320M, a polypropylene (PP) random copolymer that can be used in caps and closures, labware, flexible and rigid packaging of medical devices and pharmaceuticals.

Asynt CondenSyn air condenser and adapter kit

12 January, 2017

Asynt has announced a post-pump adapter kit that enables its CondenSyn air condenser to be used as an effective exhaust trap for laboratory vacuum pumps.

Kartell Graduated Wide Neck Bottles

25 November, 2016

Kartell Graduated Wide Neck bottles are manufactured with a long neck thread that ensures a leakproof closure. They also feature a wide neck, allowing for easy filling and emptying of liquids or powder samples.

Thermo Scientific Decapper 500 and 550 series tube capping systems

11 November, 2016

For researchers seeking to streamline their sample storage processes, Thermo Fisher Scientific and Hamilton Storage have partnered to offer the fully automated Thermo Scientific Decapper 500 and 550 series tube capping systems.

TENAK SlimTube cryotube

30 September, 2016

The SlimTube is only 12 mm in diameter, allowing the storage of 100 tubes in a 10 x 10 array in a standard cryobox while retaining the external thread to ensure no sample contamination.

Air condenser saves university millions of litres of water

09 September, 2016

Air condensers from Radleys have helped win a prestigious conservation award for the University of California, San Diego, with the university saving an estimated 5.7 million litres of water following their installation.

Asynt CondenSyn Mini air condenser

09 August, 2016

Asynt has introduced the CondenSyn Mini — a high-performance air condenser optimised for small-scale synthetic chemical reactions performed in 5, 10 and 25 mL flasks.

Kartell Imhoff sedimentation cone and stand

19 May, 2016

Kartell manufactures Imhoff sedimentation cones for the analysis of settleable solids in water. The cones are made crystal clear with permanently mounded graduations.

Asynt ReactoMate Controlled Laboratory Reactor with Mettler-Toledo RX-10 automation system

29 April, 2016

The Mettler-Toledo RX-10 automation system provides an interface connecting any type and volume of Asynt ReactoMate CLR to circulating thermostats, stirrer motors and sensors. This allows researchers precision automation, control and monitoring of chemical reactions and processes in the lab or kilo lab environment.

Greiner Bio-One CELLview dish

29 April, 2016

The Greiner CELLview glass bottom dish combines the convenience of a 35 mm disposable dish with the optical quality of glass, providing high-resolution microscopic images of in-vitro cultures.

Kartell PP and PMP TPX graduated beakers

07 December, 2015

Kartell manufactures a large range of graduated beakers in a variety of different plastics. They are available with plain-moulded or blue-printed graduations and are suitable for foodstuff.

Airwolf AXIOM 3D Printer

15 September, 2015

The Airwolf AXIOM 3D printer combines the versatility of printing in over 40 thermoplastic materials and a build volume of over 16,000 cm3 to offer a high-performance desktop 3D printer for manufacturing high-precision prototypes and custom functional parts.

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd