Products

Dionex FLD-3000 fluorescence detector

03 February, 2010 | Dionex Pty Ltd

The FLD-3000 is a high-sensitivity fluorescence detector series for the UltiMate 3000 HPLC systems. It is available in Rapid Separation (100 Hz) and Standard (20 Hz) versions.

F0008-Falling Dart Impact Tester

03 February, 2010 | IDM Instruments

The F0008-Falling Dart Impact Tester covers the determination of the energy that causes polyethylene film to fail under specified conditions, with the impact of a free-falling dart. This energy is expressed in terms of weight (mass) of the dart falling from a specified height, which would result in 50% failure of specimens tested.

Supelco Supel-Select HLB SPE

03 February, 2010 | Merck

Supelco Supel-Select HLB SPE is hydrophilic modified styrene-based polymer developed for the solid-phase extraction of a highly broad range of compounds from aqueous samples.

Advantech multifunction USB-4702 DAQ

03 February, 2010 | Advantech Australia Pty Ltd

The Industrial Automation Group of Advantech has introduced an 8-channel, 12-bit, 10 kS/s multifunction USB DAQ module for testing, laboratory, student or training use. The USB-4702 is a specialised low-cost unit that has no casing whatsoever and is intended for users looking for basic functionality.

Palintest ChlordioXense chlorine dioxide tester

03 February, 2010 | Palintest Ltd

Palintest has developed a new method for testing chlorine dioxide levels in water. The ChlordioXense provides accurate testing without relying on subjective analysis for results. The instrument eliminates the potential for user error giving precise, consistent results whatever the operator’s level of experience.

UltiMate 3000 RSLCnano Rapid Separation Nano LC system

03 February, 2010 | Dionex Pty Ltd

The UltiMate 3000 RSLCnano Rapid Separation Nano LC system offers improved confidence in performance, results and in ease of operation.

Viper HPLC connectors

03 February, 2010 | Dionex Pty Ltd

When working with small column volumes, capillaries and connections need special attention. But even with conventional columns and moderate pressures, mediocre connections can cause retention time shifts and peak distortions.

Shore Digital Durometer hardness testers

03 February, 2010 | SI Instruments

Shore Digital Durometer Hardness Testers can be used to measure the hardness of rubber and plastics according to ASTM D2240, DIN 53505, ISO 868 and ISO 7619. Shore A scale is applicable for rubber and soft plastics whereas Shore D is for hard rubber and thermoplastics.

Eppendorf Research plus pipette

03 February, 2010 | Lomb Scientific (Aust) Pty Ltd

The Eppendorf Research plus pipette is designed to meet precision and accuracy requirements.

National Scientific Mass Spec Certified Vials

03 February, 2010 | Thermo Fisher Scientific

Thermo Fisher Scientific has introduced the new National Scientific Mass Spec Certified Vials, which are cleaned and tested as standard.

TPP Bioreactor 600 mL filter tube

03 February, 2010 | Lomb Scientific (Aust) Pty Ltd

The TPP 600 mL Bioreactor tube will be available in March 2010. It is supplied with a gas porous filter facilitating culture growth using suitable supports, while shaking at a temperature of 37°C.

Capit-All IS Automated Capper/Decapper

03 February, 2010 | Thermo Fisher Scientific

Thermo Fisher Scientific and The Automation Partnership have jointly introduced the Capit-All IS Automated Capper/Decapper. This robust, high-throughput instrument can de-cap or re-cap an entire rack of samples in less than 10 s. Secure capping is ensured as each tube is individually sealed by its own separate clutch mechanism to the optimal torque, while all 96 caps are secured simultaneously for fast, quality capping. The incorporation of an automated drip tray and a vacuum extraction port reduce any risk of contamination.

Thermo Scientific Watson LIMS

03 February, 2010 | Thermo Fisher Scientific

Thermo Fisher Scientific has released a full-featured LIMS that offers automated data management and is designed specifically for small to mid-sized laboratories. The recently released Thermo Scientific Watson LIMS offers enhanced functionality for large molecule bioanalysis in pharmaceutical and contract research organisation laboratories.

Büchi SpeedDigester K-439 IR digester

21 January, 2010 | In Vitro Technologies Pty Ltd

The Büchi SpeedDigester K-439 IR digester is claimed to be the first infrared digestion system to combine both high-level automation and precise temperature control which allows good reproducibility.

Dionex InGuard inline sample pretreatment cartridges

21 January, 2010 | Dionex Pty Ltd

Dionex has released the InGuard line of multiuse inline sample preparation cartridges for ion chromatography. These cartridges are packed with a range of resins that can automatically remove matrix interferences such as anions, cations including transition metals and hydrophobic contaminants including lipids.

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd