Lab equipment > Workstations

Hamilton Robotics NGS STAR assay-ready workstation

29 November, 2023

Hamilton Robotics' NGS STAR assay-ready workstation is a comprehensive solution for next-generation sequencing (NGS) applications from whole genome to whole transcriptome sequencing and targeted sequencing applications.


AppliFlex ST bioreactor for single-use, customisable bioprocessing

01 November, 2023

The AppliFlex ST has been designed to make life in the lab easy. The bioreactor is available in 500 mL, 3 L and 15 L capacities.


OMNI Prep 96 Automated Homogeniser Workstation

01 March, 2023

The Prep 96 is designed to mimic manual homogenisation using the same generator probe movement, providing automated homogenisation.


Modernising therapeutic cell production challenges dogma and terminology

19 December, 2022 by Randy Yerden*

Moving away from legacy facilities, equipment and practices is essential for advancing cell-based therapies.


HEMCO Mobile Table

28 November, 2022

HEMCO's Mobile Table is designed to support lightweight laboratory equipment. It has a standard height of 0.76 m.


Biotage Extrahera HV-5000 automated sample preparation workstation

20 May, 2022

The Biotage Extrahera HV-5000 is an automated workstation dedicated to column-based sample preparation that is able to aspirate and dispense high-volume samples.


ALA Scientific Xenoplace Workstation

14 February, 2022

The product can be configured for specialised applications such as electrophysiology; extracellular, in vitro and in vivo recordings; and investigating the electrical properties of Xenopus oocytes (the egg of the African leopard frog).


Oxford Optronix HypoxyLab hypoxia workstation and incubator

08 March, 2021

The HypoxyLab by Oxford Optonix is a workstation and incubator, designed to enable precisely controlled levels of oxygen, carbon dioxide, temperature and humidity within a highly stabilised HEPA-filtered clean environment.


Beckman Coulter Life Sciences Biomek i7 Automated Workstation

01 March, 2021

Beckman Coulter Life Sciences introduces the Biomek i7 Automated Workstation, an automated NGS solution that can be used to accelerate genomic research.


Don Whitley Scientific Whitley A20 Workstation

07 July, 2020

The workstation is equipped with two oval, multifunctional glove ports that act as mini airlocks, each capable of transferring 10 x 90 mm Petri dishes as the user inserts their arms.


HEMCO MicroFlow II ductless workstation

11 June, 2019

The MicroFlow II is a Class 1 ductless carbon filtered workstation equipped with activated carbon filtration, for fumes, odours and non-hazardous chemical vapours. It is completely self-contained with an integral recessed work surface to contain spills.


HEMCO MicroFlow I rust-resistant, self-contained workstation

21 May, 2019

The MicroFlow I Workstation is a ductless carbon-filtered workstation equipped with activated carbon filtration, designed to collect small amounts of non-hazardous fumes and odours.


HEMCO Microflow III Class 1 ductless workstation

25 October, 2018

The MicroFlow III is a Class 1 ductless carbon filtered workstation, equipped with particle pre-filter and activated carbon filtration. It is suitable for fumes, odours and non-hazardous chemical vapours.


Sartorius Stedim Biotech ambr 250 high throughput (ht) perfusion bioreactor system

22 March, 2018

Sartorius Stedim Biotech (SSB) has announced the ambr 250 high throughput (ht) perfusion, an automated parallel bioreactor system. It has been specially designed for rapid cell culture perfusion process development to optimise production of therapeutic antibodies.


Tecan RESOLVEX A200 positive pressure workstation for LC-MS sample prep

12 September, 2017

Tecan has unveiled the automated RESOLVEX A200 positive pressure workstation for LC-MS sample prep. Said to be lighter and smaller than previous systems, it has been carefully designed to offer ease of use and enhanced performance.


  • All content Copyright © 2023 Westwick-Farrow Pty Ltd