Lab equipment

Biotix biodegradable reagent reservoirs

06 August, 2010 | Supplied by: Interpath Services Pty Ltd

Biotix biodegradable reagent reservoirs have an SBS footprint and are suitable for general or high-throughput applications with lot-specific certification, bar-code traceability and RNase, DNase, pyrogen, endotoxin, nucleic acid and trace metal-free status. The reservoirs are also compatible with multi-channel pipettes and robotic grippers, and have a wide chemical compatibility.


Gems Sensors & Controls CAP-100/-200 capacitive liquid level sensors

06 August, 2010 | Supplied by: Control Components Pty Ltd

Gems Sensors & Controls CAP-100 and CAP-200 Series capacitive liquid level sensors offer a level-sensing solution for a wide variety of bottle types including plastic, glass and fibreglass. These compact sensors are suitable for medical applications such as waste, reagent or diluent liquids as well as dark, sticky or viscous fluids. Easy to calibrate, both sensor series are available in both aqueous and non-aqueous versions and can be delivered with factory preset sensitivity for quick installation for OEM orders. They may also be used as a proximity sensor to detect the presence of solids such as paper or pulp.


Thomas Cain DEENA automated acid digestion system

06 August, 2010 | Supplied by: Accurate Detection Pty Ltd

The Thomas Cain DEENA automated acid digestion system fully automates the sample preparation for EPA and other laboratory methods that use hot water baths or heated blocks. Typically in metal and mercury analysis, manual sample preparation often consists of many steps that are both labour intensive and time consuming and expose the operator to dangerous chemicals.


Hach No Glass electrodes

06 August, 2010 | Supplied by: Accurate Detection Pty Ltd

Hach’s stainless steel ISFET probes feature a solid state sensing element to give rapid pH results without the problems associated with fragile glass electrodes.


Kartell pipette filler (Art. 200)

06 August, 2010 | Supplied by: Sieper & Co Pty Ltd

Kartell’s pipette filler (Art. 200) is a moulded bulb made of synthetic rubber and has an approximate capacity of 60 mL. Three glass ball valves control the evacuation of air, liquid uptake and liquid dispensing. The valves are controlled by finger pressure. Users expel air from the bulb by squeezing the ‘A’ valve and the bulb at the same time. Liquid is drawn into the pipette by squeezing the ‘S’ valve and dispensed by squeezing the ‘E’ valve.


Scientifica PatchStar electrophysiology micromanipulator

06 August, 2010 | Supplied by: SciTech Pty Ltd

The Scientifica PatchStar electrophysiology micromanipulator is suitable for patch clamping, sharp electrode recording, microinjection, stretch testing and other procedures requiring delicate and long-term positioning.


Baseline cylinder regulators

06 August, 2010 | Supplied by: BOC Limited

Baseline cylinder regulators have been specifically designed to maintain the integrity of the high-purity specialty gases.


Schott Duran GL45 laboratory glass bottles

06 August, 2010 | Supplied by: SCHOTT Australia Pty Ltd

Schott Duran has extended the range of volumes available in its GL45 laboratory glass bottles to include 150, 750 and 3500 mL bottles.


Netter NTK model vibratory feeder

05 August, 2010 | Supplied by: Vibration Systems & Solutions (Australia) Pty Ltd

In addition to the regular EziPack vibrating feeder, Vibration Systems & Solutions has released the EziPack 4, a smaller version with a 4 L hopper and reduced tray size.


Thermo Scientific RheoScope module

05 August, 2010 | Supplied by: Rheology Solutions Pty Ltd

The RheoScope module simultaneously measures rheological properties and changes in the microscopic structure of the tested sample. The results allow researchers to speed formulation development, process optimisation and product processability.


Simport FlexTainer C590 containers

05 August, 2010 | Supplied by: Lomb Scientific (Aust) Pty Ltd

Simport FlexTainer C590 containers are expandable accordion-type jugs which flatten down for easy transport. The containers are suitable for carrying and storing numerous types of fluids and are suitable for use in any laboratory.


Legato 270 syringe pump

05 August, 2010 | Supplied by: Walker Scientific Pty Ltd

The Legato 270 syringe pump has an optimised user-configurable syringe mechanism designed to deliver a full volume in infuse and withdraw modes whether using small or large syringes.


Peak Scientific Instruments ABN2ZA and AB-3G nitrogen generators

05 August, 2010 | Supplied by: On Site Generating Solutions

Peak Scientific Instruments’ ABN2ZA and the AB-3G nitrogen generators have been specifically designed to operate LCMS instruments manufactured by Applied Biosystems/MDS Sciex.


Duran baffled Erlenmeyer flasks

05 August, 2010 | Supplied by: Lomb Scientific (Aust) Pty Ltd

Duran baffled Erlenmeyer flasks are claimed to reduce cell growth, due to limited oxygen transfer, and cause a turbulent flow which increases the gas exchange surface.


Thermoline refrigerated incubator for TPS-16 platelet shaker

04 August, 2010 | Supplied by: Thermoline Scientific Equipment Pty Ltd

This bench-mounted refrigerated incubator has been specifically designed to suit the TPS-16 platelet shaker from Thermoline. The TPS-16 reciprocating shaker has been specifically designed to hold platelet bags, which include the new larger bags being adopted. This model operates at a fixed speed of 60 strokes/min. Seven slide-out shelves are supplied standard, plus one fixed top shelf.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd