Lab equipment

Schott Duran GL45 laboratory glass bottles

06 August, 2010 | Supplied by: SCHOTT Australia Pty Ltd

Schott Duran has extended the range of volumes available in its GL45 laboratory glass bottles to include 150, 750 and 3500 mL bottles.


Baseline cylinder regulators

06 August, 2010 | Supplied by: BOC Limited

Baseline cylinder regulators have been specifically designed to maintain the integrity of the high-purity specialty gases.


Simport FlexTainer C590 containers

05 August, 2010 | Supplied by: Lomb Scientific (Aust) Pty Ltd

Simport FlexTainer C590 containers are expandable accordion-type jugs which flatten down for easy transport. The containers are suitable for carrying and storing numerous types of fluids and are suitable for use in any laboratory.


Legato 270 syringe pump

05 August, 2010 | Supplied by: Walker Scientific Pty Ltd

The Legato 270 syringe pump has an optimised user-configurable syringe mechanism designed to deliver a full volume in infuse and withdraw modes whether using small or large syringes.


Peak Scientific Instruments ABN2ZA and AB-3G nitrogen generators

05 August, 2010 | Supplied by: On Site Generating Solutions

Peak Scientific Instruments’ ABN2ZA and the AB-3G nitrogen generators have been specifically designed to operate LCMS instruments manufactured by Applied Biosystems/MDS Sciex.


Duran baffled Erlenmeyer flasks

05 August, 2010 | Supplied by: Lomb Scientific (Aust) Pty Ltd

Duran baffled Erlenmeyer flasks are claimed to reduce cell growth, due to limited oxygen transfer, and cause a turbulent flow which increases the gas exchange surface.


Netter NTK model vibratory feeder

05 August, 2010 | Supplied by: Vibration Systems & Solutions (Australia) Pty Ltd

In addition to the regular EziPack vibrating feeder, Vibration Systems & Solutions has released the EziPack 4, a smaller version with a 4 L hopper and reduced tray size.


Thermo Scientific RheoScope module

05 August, 2010 | Supplied by: Rheology Solutions Pty Ltd

The RheoScope module simultaneously measures rheological properties and changes in the microscopic structure of the tested sample. The results allow researchers to speed formulation development, process optimisation and product processability.


Thermoline refrigerated incubator for TPS-16 platelet shaker

04 August, 2010 | Supplied by: Thermoline Scientific Equipment Pty Ltd

This bench-mounted refrigerated incubator has been specifically designed to suit the TPS-16 platelet shaker from Thermoline. The TPS-16 reciprocating shaker has been specifically designed to hold platelet bags, which include the new larger bags being adopted. This model operates at a fixed speed of 60 strokes/min. Seven slide-out shelves are supplied standard, plus one fixed top shelf.


Eppendorf Xplorer pipette

04 August, 2010 | Supplied by: Eppendorf South Pacific Pty Ltd

Precision, accuracy and ergonomic handling are standard features of the Xplorer pipette. In pipetting, if a significant amount of muscle strain is used, long-term, repetitive-stress injuries can occur. This is especially true for longer pipetting series. With an electronic piston stroke, low weight and intuitive user guidance, electronic pipettes like the Xplorer minimise user strain. The perfect balance and the finger rest ensure a position that is particularly easy on the joints.


Serva Float-A-Lyzer G2 dialysis system

04 August, 2010 | Supplied by: Lomb Scientific (Aust) Pty Ltd

Serva Float-A-Lyzer G2 is a ready-to-use dialysis system featuring an ultrapure biotech cellulose ester membrane. The device is dialysis tubing with polycarbonate closures at both ends. The ends are sealed with a screw-on cap which enables easy sample handling. Each bottle is individually wrapped.


Gems Sensors & Controls fluid control for life sciences

04 August, 2010 | Supplied by: Control Components Pty Ltd

Gems Sensors & Controls has created a separate division to serve the specialised fluid control and handling requirements of the medical device, diagnostic, life science and biotechnology market segments, Gems Medical Sciences.


Thermo Scientific 8-channel decapper

04 August, 2010 | Supplied by: Thermo Fisher Scientific

Thermo Scientific has released an 8-channel decapper for handheld capping and decapping of multiple tubes in a 96-well microplate footprint. With the ability to remove and replace screw caps with precision and ease, the time-consuming task of manually capping and decapping, as well as the risk of repetitive strain injury (RSI), are eliminated.


Rigaku Desktop Alchemist liquid handling system

04 August, 2010 | Supplied by: Meeco Holdings Pty Ltd

The Rigaku Desktop Alchemist liquid handling system for protein crystallisation optimisation is a cost-effective laboratory automation tool. Complex fine screens can be set up in under 3 min, with an entire screen competed in under 25 min. From intuitive and easy-to-use software, to high dispense accuracy and precision across all viscosities, the system delivers reproducible fine screens on the user’s benchtop.


Thermo Scientific 8-channel decapper

03 August, 2010 | Supplied by: Thermo Fisher Scientific

Thermo Scientific has released an 8-channel decapper for handheld capping and decapping of multiple tubes in a 96-well microplate footprint. With the ability to remove and replace screw caps with precision and ease, the time-consuming task of manually capping and decapping, as well as the risk of repetitive strain injury (RSI), are eliminated.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd