Rapid ashing systems
06 April, 2009 | Ai Scientific Pty Ltd
The Phoenix line of microwave-powered muffle furnaces can be used to ash samples in minutes. Available in two configurations with a variety of options, the system offers a choice of either a high-temperature furnace, reaching 1200°C, or a high-capacity furnace, reach 1000°C.
Brushed DC motor package
06 April, 2009 | maxon motor Australia Pty Ltd
The RE 65 brushed DC motor package delivers 250 W and can cope with tough demands. The motor is particularly suitable for applications where high efficiency, high power density and a minimal operating noise are required.
30-place microcentrifuge
06 April, 2009 | Eppendorf South Pacific Pty Ltd
Eppendorf has released the 5430, a 30-place microcentrifuge. Users have the choice of eight different rotors, for tubes from 0.2 up to 50 mL, microtest plates, deepwell plates and slides.
Aflatoxin test kits
06 April, 2009 | Graintec Pty Ltd
Graintec supplies rapid aflatoxin test kits for pet food and food manufacturers.
Tissue dissociation guide
06 April, 2009 | Scimar
Worthington Biochemical Corp has updated its Tissue Dissociation Guide, which is an online guide available to assist researchers.
Piezoresponse force microscopy monograph
06 April, 2009 | The Innovation Group Pty Ltd
Asylum Research and Oak Ridge National Laboratory have released a 24-page monograph explaining the theory, functionality and applications of piezoresponse force microscopy (PFM).
Remote-controlled vacuum
06 April, 2009 | Javac Pty Ltd
KNF Lab’s wireless SC920 series vacuum pump system provides precise processing, quiet operation and wireless remote control regulation of all vacuums. The touch-screen remote provides full operation of the pump’s different operating modes and functions, allowing for flexibility and optimal use of laboratory space.
Clean area control
06 April, 2009 | Novasys Group Pty Ltd
Dycem Clean-Zone Premier is a high-performance contamination control zone designed to attract, collect and retain foot and wheelborne contamination, preventing particles and microbes from getting into critical areas. Dycem Clean-Zone is available in a range of attractive designs, looks good between wet cleaning and is suitable for light wheeled and heavier pedestrian traffic.
DG laboratory safety caps
06 April, 2009 | SCHOTT Australia Pty Ltd
The DG Safety Cap is designed specifically for laboratories that handle highly aggressive gas-forming liquids or solvents that need to be transferred safely and cleanly.
Yeast and moulds enumeration
06 April, 2009 | bioMerieux Australia
The Tempo YM automated quality indication system has been designed as a rapid solution for direct enumeration of yeast and mould in food samples.
Chiral HPLC/SFC columns
06 April, 2009 | Phenomenex Australia
The Lux line of polysaccharide-based columns is suitable for the identification and resolution of enantiomers. Lux columns are offered with two chiral stationary phases (CSPs), both of which use coated derivatised cellulose as the chiral selector. The two phases combine to create a dependable screening set with a wide range of selectivity. The Lux line is based on chiral technology that Phenomenex acquired along with the company Sepaserve.
Particulate monitoring
06 April, 2009 | Ecotech Pty Ltd
MetOne Instruments has announced that the BAM-1020 Beta-Attenuation Mass Monitor has been approved under Australian Standard AS/NZS 3580.9.11.2008 for the determination of particulate matter, PM10, using Beta attenuation.
Cell particle processor
06 April, 2009 | Pathtech Pty Ltd
The Thermo Scientific Kingfisher Flex is a compact magnetic bead particle processing system for purification of DNA, RNA, proteins or cells. It can process 96 samples simultaneously and has a processing volume of 20 to 5000 µL.
Flash chromatography
06 April, 2009 | Grace Discovery Sciences
The Reveleris flash chromatography system has been designed to save time and minimise guesswork in purifications.
Homogenising, emulsifying, crushing and dispersion
06 April, 2009 | John Morris Scientific Pty Ltd
ART’s Miccra series of mixers are designed for homogenisation, emulsification, suspension, dispersion and crushing. The mixers can be handheld or mounted on a post.
