Buccal swabs
08 April, 2009 | Supplied by: VWR International Pty Ltd
The nylon flocked buccal swabs from MicroRheologics are suitable for applications where the sample size is particularly small or where increased sensitivity is required.
Sterile valve connections
08 April, 2009 | Supplied by: FlowTherm Australia Pty Ltd
Colder Products Company has released the Steam-Thru II Connections, which provides a sterile connection between disposable systems and existing stainless steel processing equipment.
Electrode management system
08 April, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
The Memobase electrode management system provides users insight into the reliability, performance, estimated lifetime and early-warning-failure of pH electrodes.
Miniature motor
08 April, 2009 | Supplied by: ERNTEC Pty Ltd
The ADM 0620 is a miniature two-phase stepper motor with a 6 mm outer diameter, is 9.3 mm long, weighs 1.4 g and provides a high power-to-volume ratio.
Adhesion slides
08 April, 2009 | Supplied by: Sapphire Bioscience
ImmunoSelect Adhesion Slides by Squarix Biotechnology feature a surface that immobilises cells and tissue sections and maintains a high retention of cell and tissue morphology. This helps to reduce the amount of cellular material and reagents required.
Colour analyser
08 April, 2009 | Supplied by: IDM Instruments
The ColorQA is a colour comparison device that digitally measures the colour of a target and then allows the user to sample any number of comparison colours to determine a match.
Reagent reservoir
08 April, 2009 | Supplied by: Lomb Scientific (Aust) Pty Ltd
The V-shaped wells of the Scienceware 12 Channel Reagent Reservoir allow complete sample withdrawal and minimise the waste of reagents. Each channel holds up to 5 mL and is numbered to facilitate serial dilution.
Sub-visible particle analyser
08 April, 2009 | Supplied by: Crea Laboratory Technologies Pty Ltd
The Pamas SVSS is a laboratory particle counter for the measurement of particulates in liquids. The counter can be used for many fluid applications where particle quantifying and particle size from 1 µm upwards is important.
OEM liquid handling robot
08 April, 2009 | Supplied by: Ai Scientific Pty Ltd
Tecan has developed the Cavro Omni Robot, a general-purpose OEM liquid handling robot for a wide range of applications within clinical diagnostic, life sciences and analytical chemistry.
Temperature monitor
08 April, 2009 | Supplied by: SDR Scientific
The TM-3 Three-Scale Thermistor Temperature Monitor is designed for accurate temperature measurement. It is a portable thermometer that features celsius, fahrenheit and kelvin scales in a large, easy-to-read display.
Cogless AC servomotor
08 April, 2009 | Supplied by: M Rutty & Co Pty Ltd
The absence of teeth in the MLL Series Non-Cogging AC servomotor results in no reluctance variation in the 360° motor rotation.
Flip-top sample tubes
08 April, 2009 | Supplied by: Bacto Laboratories Pty Ltd
The BD Falcon 50 ml polypropylene conical tube with flip-top cap is suitable for any research applications requiring one-handed operations to open and close the cap.
Stirring hot plates
08 April, 2009 | Supplied by: Edwards Group Pty Ltd
Torrey Pines Scientific has released a line of multi-position analog stirring hot plates featuring five or nine stirrers. The 30 cm square ceramic heater tops have a temperature range to 450°C.
Gas sample cylinder
08 April, 2009 | Supplied by: Duff & Macintosh
Sentry’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.
Microcentrifuge
08 April, 2009 | Supplied by: Eppendorf South Pacific Pty Ltd
The 30-place microcentrifuge 5430 line provides a range of options, including eight different rotors, tubes from 0.2 to 50 mL, microtest plates, deepwell plates and slides.
