Buccal swabs
08 April, 2009 | Supplied by: VWR International Pty Ltd
The nylon flocked buccal swabs from MicroRheologics are suitable for applications where the sample size is particularly small or where increased sensitivity is required.
Gas sample cylinder
08 April, 2009 | Supplied by: Duff & Macintosh
Sentry’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.
Vacuum gauge controller
08 April, 2009 | Supplied by: Varian Australia Pty Ltd
The XGS-600 high-capacity vacuum gauge rack controller provides monitoring and control of multiple roughing, high vacuum and ultra-high vacuum gauges in a standard half-rack package.
Vacuum pump
08 April, 2009 | Supplied by: PIAB Vacuum Technologies
The P6040 vacuum pump range with COAX technology provides flexible mounting options, an extensive performance range and optional control functions, making it very adaptable and suitable for most industrial vacuum applications.
Cogless AC servomotor
08 April, 2009 | Supplied by: M Rutty & Co Pty Ltd
The absence of teeth in the MLL Series Non-Cogging AC servomotor results in no reluctance variation in the 360° motor rotation.
Inline viscometers
08 April, 2009 | Supplied by: Rheology Solutions Pty Ltd
The Marimex range of ViscoScopes provides maintenance-free viscosity measurement for inline applications.
Nanoparticle tracking
08 April, 2009 | Supplied by: Particle & Surface Sciences Pty Ltd
The Nanoparticle Tracking Analysis system from NanoSight Techology is based on laser light scattering microscopy. The instruments can visualise and dynamically size populations of particles in a liquid on an individual basis in the particle size range of 10-1000 nm, dependent on material.
Flow analysers
08 April, 2009 | Supplied by: ALPE Pty Ltd
The Futura flow analysers reach very low detection limits, while still extending the reporting ranges of results and speeding up the operation by reducing the number of dilutions.
Cell culture media bottle
08 April, 2009 | Supplied by: Life Technologies
The Gibco cell culture media bottle has an angled neck for easier pipetting and pouring; a compact form for improved handling and storage; and a wider mouth to reduce the chance of contact with the pipette.
Sub-visible particle analyser
08 April, 2009 | Supplied by: Crea Laboratory Technologies Pty Ltd
The Pamas SVSS is a laboratory particle counter for the measurement of particulates in liquids. The counter can be used for many fluid applications where particle quantifying and particle size from 1 µm upwards is important.
LabServ Microcentrifuge
08 April, 2009 | Supplied by: Thermo Fisher Scientific
The LabServ Microcentrifuge (LBS7510) spins up to 2200 x g and holds 6 x 2 mL/1.5 mL tubes. It comes equipped with adapters for 0.5 mL tubes as well as an interchangeable rotor for 2 x 8-strip PCR tubes (0.2 mL).
Permeable membrane cap
08 April, 2009 | Supplied by: SCHOTT Australia Pty Ltd
The Schott Duran permeable membrane cap can release gases to relieve pressure in a sealed bottle.
Temperature and humidity monitor
08 April, 2009 | Supplied by: Testo Pty Ltd
The Saveris measurement system measures temperature and humidity values in the environment and in processes. The easy-to-use system features radio probes that save their measurement data and send it to the central base at regular intervals.
Stirring bar multi-pack
08 April, 2009 | Supplied by: VWR International Pty Ltd
The Spinpak Assortment with Spinbar Restrainer offers octagonal magnetic stirring bars in 12.5, 25.5, 38 and 51 mm lengths in either a 3.2 or 8 mm diameter.
Environmentally friendly pipette
08 April, 2009 | Supplied by: DKSH Australia Pty Ltd
The Capp Ecopipette is a light, ergonomically designed pipette made from eco-friendly materials selected and constructed to provide a long life cycle.
