AM 2224 stepper motor
08 April, 2009 | Supplied by: ERNTEC Pty Ltd
The AM 2224 two-phase miniature stepper motor has a diameter of 22 mm and a high power-to-volume ratio. The motor achieves an output of 2.5 W and a peak holding torque of 45 mNm.
Environmentally friendly pipette
08 April, 2009 | Supplied by: DKSH Australia Pty Ltd
The Capp Ecopipette is a light, ergonomically designed pipette made from eco-friendly materials selected and constructed to provide a long life cycle.
Flow analysers
08 April, 2009 | Supplied by: ALPE Pty Ltd
The Futura flow analysers reach very low detection limits, while still extending the reporting ranges of results and speeding up the operation by reducing the number of dilutions.
Current shunt kit
08 April, 2009 | Supplied by: Fluke Australia Pty Ltd
The A40B precision current shunt set features a range of precision devices designed to simplify the task of making precision current measurements in the laboratory. The set comprises 14 low-inductance coaxial current shunts, adapters and connectors and a rugged transit/storage case.
Nanoparticle tracking
08 April, 2009 | Supplied by: Particle & Surface Sciences Pty Ltd
The Nanoparticle Tracking Analysis system from NanoSight Techology is based on laser light scattering microscopy. The instruments can visualise and dynamically size populations of particles in a liquid on an individual basis in the particle size range of 10-1000 nm, dependent on material.
Colour analyser
08 April, 2009 | Supplied by: IDM Instruments
The ColorQA is a colour comparison device that digitally measures the colour of a target and then allows the user to sample any number of comparison colours to determine a match.
Ohm meter
08 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The KoCoS Promet 100 Precision Ohm meter is suited to tasks including earth bond and weld testing, as well as circuit breaker main contact testing. The device interfaces with the KoCoS range of ACTAS (Advanced Circuit Breaker Test and Analysis Systems) instrumentation.
Force tester
08 April, 2009 | Supplied by: Royce Water Technologies Pty Ltd
The Chatillon TCD225 force-testing system can be set up in seconds to perform a wide variety of tests. It allows users to perform singular or multi-variable testing without relying on a personal computer or complex software.
Adhesion slides
08 April, 2009 | Supplied by: Sapphire Bioscience
ImmunoSelect Adhesion Slides by Squarix Biotechnology feature a surface that immobilises cells and tissue sections and maintains a high retention of cell and tissue morphology. This helps to reduce the amount of cellular material and reagents required.
OEM liquid handling robot
08 April, 2009 | Supplied by: Ai Scientific Pty Ltd
Tecan has developed the Cavro Omni Robot, a general-purpose OEM liquid handling robot for a wide range of applications within clinical diagnostic, life sciences and analytical chemistry.
Stirring hot plates
08 April, 2009 | Supplied by: Edwards Group Pty Ltd
Torrey Pines Scientific has released a line of multi-position analog stirring hot plates featuring five or nine stirrers. The 30 cm square ceramic heater tops have a temperature range to 450°C.
Sterile valve connections
08 April, 2009 | Supplied by: FlowTherm Australia Pty Ltd
Colder Products Company has released the Steam-Thru II Connections, which provides a sterile connection between disposable systems and existing stainless steel processing equipment.
Gas sample cylinder
08 April, 2009 | Supplied by: Duff & Macintosh
Sentry’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.
Buccal swabs
08 April, 2009 | Supplied by: VWR International Pty Ltd
The nylon flocked buccal swabs from MicroRheologics are suitable for applications where the sample size is particularly small or where increased sensitivity is required.
Flip-top sample tubes
08 April, 2009 | Supplied by: Bacto Laboratories Pty Ltd
The BD Falcon 50 ml polypropylene conical tube with flip-top cap is suitable for any research applications requiring one-handed operations to open and close the cap.
