Clements benchtop centrifuge
07 April, 2009 | Supplied by: http://www.clements.net.au
The Clements Orbital 360 Benchtop Centrifuge (CEN 91700) features a maintenance free, brushless DC motor, capable of a maximum speed of 5,000 rpm (4,100 g).
Magnetic stirring bar
07 April, 2009 | Supplied by: Lomb Scientific (Aust) Pty Ltd
The Spinbar Capsule Magnetic Stirring Bar consists of a magnetic stirring bar that spins freely inside a small flat capsule and prevents the stirring bar from contacting the gel.
Compression testing
06 April, 2009 | Supplied by: Power Parameters Pty Ltd
The Time Group YAW Hydraulic Testing Machines are suitable for compression testing of hard, brittle materials including cement, concrete and other construction materials.
Cryopreservation media
06 April, 2009 | Supplied by: Sapphire Bioscience
The cryopreservation media manufactured by Cellular Engineering Technologies can be used to freeze both adherent and non-adherent cells.
Circular sample cutter
06 April, 2009 | Supplied by: IDM Instruments
IDM Instruments has designed a Circular Hand Cutter for fast, precise and repetitious sample cutting of paper, paperboard, textiles and corrugated and solid fibreboard.
Disposable medical thermistor probes
06 April, 2009 | Supplied by: Thermal Component Technologies
The NTC thermistors from Measurement Specialties can be used in disposable medical temperature products to improve monitoring accuracy and clinical hygienic standards. The sensors offer sensitivity, durability and interchangeability in a variety of physical configurations.
Peel testing
06 April, 2009 | Supplied by: IDM Instruments
The Mark-10 90° Peel Fixture can be used within the packaging and other industries, alongside the Motorised Test Stand.
Density meters
06 April, 2009 | Supplied by: Metrohm Australia & New Zealand
Anton Paar Generation M density meters are ergonomically designed and easy to use.
DG laboratory safety caps
06 April, 2009 | Supplied by: SCHOTT Australia Pty Ltd
The DG Safety Cap is designed specifically for laboratories that handle highly aggressive gas-forming liquids or solvents that need to be transferred safely and cleanly.
Incubator CO2 analyser
06 April, 2009 | Supplied by: Geotech Systems Australia Pty Ltd
The Geotech G100 incubator CO2 analyser is an easy-to-use, handheld CO2 analyser accurate in the 0-20% range with a bright, clear display.
Rapid ashing systems
06 April, 2009 | Supplied by: Ai Scientific Pty Ltd
The Phoenix line of microwave-powered muffle furnaces can be used to ash samples in minutes. Available in two configurations with a variety of options, the system offers a choice of either a high-temperature furnace, reaching 1200°C, or a high-capacity furnace, reach 1000°C.
Plug-and-play titration sensors
06 April, 2009 | Supplied by: Mettler-Toledo Ltd
Mettler Toledo has released a range of plug-and-play titration sensors, designed for precise measurement of mineral oils and derived products.
Dissolved oxygen meters
06 April, 2009 | Supplied by: Thermo Fisher Scientific
The Thermo Scientific Orion Star series of portable optical dissolved oxygen meters includes the single-parameter 3-Star RDO meter, the dual-parameter 4-Star pH/RDO meter and the multi-parameter 5-Star pH/RDO/conductivity meter.
Syringe filters
06 April, 2009 | Supplied by: Phenomenex Australia
Phenomenex has added regenerated cellulose (RC) syringe filters to its Phenex line. By removing particulates from the sample, the filters prevent build-up and blockage of chromatography columns and frits while minimising wear and tear on injection valves. Sample filtration can ultimately reduce system downtime and component replacement. The RC membranes deliver clean sample with no detectable leachates and they are compatible with HPLC, GC, IC and CE analysis.
Thermal analysis systems services
06 April, 2009 | Supplied by: Mettler-Toledo Ltd
Mettler Toledo has introduced a portfolio of services that combine knowledge and experience to help users improve cost control and reaction time, increase output and minimise risk of failure.
