Stirring bar multi-pack
08 April, 2009 | Supplied by: VWR International Pty Ltd
The Spinpak Assortment with Spinbar Restrainer offers octagonal magnetic stirring bars in 12.5, 25.5, 38 and 51 mm lengths in either a 3.2 or 8 mm diameter.
Force tester
08 April, 2009 | Supplied by: Royce Water Technologies Pty Ltd
The Chatillon TCD225 force-testing system can be set up in seconds to perform a wide variety of tests. It allows users to perform singular or multi-variable testing without relying on a personal computer or complex software.
Temperature monitor
08 April, 2009 | Supplied by: SDR Scientific
The TM-3 Three-Scale Thermistor Temperature Monitor is designed for accurate temperature measurement. It is a portable thermometer that features celsius, fahrenheit and kelvin scales in a large, easy-to-read display.
Ohm meter
08 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The KoCoS Promet 100 Precision Ohm meter is suited to tasks including earth bond and weld testing, as well as circuit breaker main contact testing. The device interfaces with the KoCoS range of ACTAS (Advanced Circuit Breaker Test and Analysis Systems) instrumentation.
Water activity meter
08 April, 2009 | Supplied by: Graintec Pty Ltd
The Aqualab Series 4 water activity meter features an intuitive menu navigation, easy-to-clean sensor area and data storage to provide high functionality and utility for operators.
Miniature motor
08 April, 2009 | Supplied by: ERNTEC Pty Ltd
The ADM 0620 is a miniature two-phase stepper motor with a 6 mm outer diameter, is 9.3 mm long, weighs 1.4 g and provides a high power-to-volume ratio.
Nanoparticle tracking
08 April, 2009 | Supplied by: Particle & Surface Sciences Pty Ltd
The Nanoparticle Tracking Analysis system from NanoSight Techology is based on laser light scattering microscopy. The instruments can visualise and dynamically size populations of particles in a liquid on an individual basis in the particle size range of 10-1000 nm, dependent on material.
Sterile valve connections
08 April, 2009 | Supplied by: FlowTherm Australia Pty Ltd
Colder Products Company has released the Steam-Thru II Connections, which provides a sterile connection between disposable systems and existing stainless steel processing equipment.
LabServ Microcentrifuge
08 April, 2009 | Supplied by: Thermo Fisher Scientific
The LabServ Microcentrifuge (LBS7510) spins up to 2200 x g and holds 6 x 2 mL/1.5 mL tubes. It comes equipped with adapters for 0.5 mL tubes as well as an interchangeable rotor for 2 x 8-strip PCR tubes (0.2 mL).
Cell culture media bottle
08 April, 2009 | Supplied by: Life Technologies
The Gibco cell culture media bottle has an angled neck for easier pipetting and pouring; a compact form for improved handling and storage; and a wider mouth to reduce the chance of contact with the pipette.
Microcentrifuge
08 April, 2009 | Supplied by: Eppendorf South Pacific Pty Ltd
The 30-place microcentrifuge 5430 line provides a range of options, including eight different rotors, tubes from 0.2 to 50 mL, microtest plates, deepwell plates and slides.
Cogless AC servomotor
08 April, 2009 | Supplied by: M Rutty & Co Pty Ltd
The absence of teeth in the MLL Series Non-Cogging AC servomotor results in no reluctance variation in the 360° motor rotation.
Permeable membrane cap
08 April, 2009 | Supplied by: SCHOTT Australia Pty Ltd
The Schott Duran permeable membrane cap can release gases to relieve pressure in a sealed bottle.
Electrode management system
08 April, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
The Memobase electrode management system provides users insight into the reliability, performance, estimated lifetime and early-warning-failure of pH electrodes.
pH tester
07 April, 2009 | Supplied by: Thermo Fisher Scientific
Powered by microprocessor technology, the EcoTestr pH 1 and pH 2 range of pocket testers is designed for hassle-free pH measurements.
